দ্রবীভূত ফ্লো ইনডেক্সার

ভূমিকা:

To determine the melt mass-flow MFR (g/10min), the melt volume-flow rate MFV(cm³/10মিনিট)and the melt density of thermo resin, for the engineering plastics of polycarbonate, nylon and fluorine plastics, ইত্যাদি, whose melt temperature are higher, but also fit for the plastics tests of polyethylene, polystyrene, polypropylene, ABS resin and poly-formaldehyde resin, ইত্যাদি, whose melt temperature are lower, it is widely applied to the fields of plastics materials, পণ্য, petrochemical

মান:

GB 3682, আইএসও 1133, ASTM D 1238, DIN 53735, UNI-5640, JJB878, and made according to JB/T5465 (Technical Standard of Melting Flow Rate Instrument).

Tests performed:

adopts PID temperature control, ডিজিটাল ডিসপ্লে, it can cut material automatically, has two measuring method, MFR and MVR, print out the test report

Main technical parameter:

Measuring range: 0. 01-600.00 g/10min (MFR)

0. 01-600.00 cm/10min(MVR)

0.001-9.999 g/cm (melt density)

Temperature range: 50-400°C

Temperature precision: ±0.5°C resolution: 0.1°C

Material canister inside diameter 9.55±0.025mm length: 160মিমি

Piston diameter 9.457±0.01mm mass: 106g

Mould inside diameter 2.095mm length: 8±0.025mm

Load: full load

Base weight: 0.325Kg.

Weights: 0.875Kg, 1.290Kg, 1.835Kg, 3.475Kg, 4.675Kg, 5.000Kg, 5.000Kg one each (may freewill combination )

নির্ভুলতা: 0.5%

Cleaning accessories: clear material pole

Calibration accessories: water level bubble

Measuring method: MFR MVR/ DENSITY

Supply Power: 220V±10% 50Hz Heat up power: about 550W

Outline size: (length*width*height ) 600*400*500 (unit: মিমি)

Net weight: 85Kg Gross weight: 135Kg