Δείκτης ροής τήγματος

Εισαγωγή:

To determine the melt mass-flow MFR (g/10min), the melt volume-flow rate MFV(cm³/10min)and the melt density of thermo resin, for the engineering plastics of polycarbonate, nylon and fluorine plastics, κλπ, whose melt temperature are higher, but also fit for the plastics tests of polyethylene, polystyrene, polypropylene, ABS resin and poly-formaldehyde resin, κλπ, whose melt temperature are lower, it is widely applied to the fields of plastics materials, προϊόν, petrochemical

Πρότυπα:

GB 3682, ΥΓ. 1133, ASTM Δ 1238, ΘΌΡΥΒΟΣ 53735, UNI-5640, JJB878, and made according to JB/T5465 (Technical Standard of Melting Flow Rate Instrument).

Tests performed:

adopts PID temperature control, ψηφιακή οθόνη, it can cut material automatically, has two measuring method, MFR and MVR, print out the test report

Main technical parameter:

Εύρος μέτρησης: 0. 01-600.00 g/10min (MFR)

0. 01-600.00 cm/10min(MVR)

0.001-9.999 g/cm (melt density)

Temperature range: 50-400°C

Temperature precision: ±0.5°C resolution: 0.1°C

Material canister inside diameter 9.55±0.025mm length: 160χιλ.

Piston diameter 9.457±0.01mm mass: 106g

Mould inside diameter 2.095mm length: 8±0.025mm

Φορτίο: full load

Base weight: 0.325Κιλ.

Weights: 0.875Κιλ, 1.290Κιλ, 1.835Κιλ, 3.475Κιλ, 4.675Κιλ, 5.000Κιλ, 5.000Kg one each (may freewill combination )

Ακρίβεια: 0.5%

Cleaning accessories: clear material pole

Calibration accessories: water level bubble

Measuring method: MFR MVR/ DENSITY

Supply Power: 220V±10% 50Hz Heat up power: about 550W

Outline size: (length*width*height ) 600*400*500 (unit: χιλ.)

Καθαρό βάρος: 85Kg Gross weight: 135Κιλ