Melt Flow Indexer

Panimula:

To determine the melt mass-flow MFR (g/10min), the melt volume-flow rate MFV(cm³/10min)and the melt density of thermo resin, for the engineering plastics of polycarbonate, nylon and fluorine plastics, atbp, whose melt temperature are higher, but also fit for the plastics tests of polyethylene, polystyrene, Polypropylene, ABS resin and poly-formaldehyde resin, atbp, whose melt temperature are lower, it is widely applied to the fields of plastics materials, produkto, petrochemical

Mga Pamantayan:

GB 3682, ISO 1133, ASTM D 1238, DIN 53735, UNI-5640, JJB878, and made according to JB/T5465 (Technical Standard of Melting Flow Rate Instrument).

Tests performed:

adopts PID temperature control, digital na display, it can cut material automatically, has two measuring method, MFR and MVR, print out the test report

Main technical parameter:

Measuring range: 0. 01-600.00 g/10min (MFR)

0. 01-600.00 cm/10min(MVR)

0.001-9.999 g/cm (melt density)

Temperature range: 50-400°C

Temperature precision: ±0.5°C resolution: 0.1°C

Material canister inside diameter 9.55±0.025mm length: 160mm

Piston diameter 9.457±0.01mm mass: 106g

Mould inside diameter 2.095mm length: 8±0.025mm

Load: full load

Base weight: 0.325Kg.

Weights: 0.875Kg, 1.290Kg, 1.835Kg, 3.475Kg, 4.675Kg, 5.000Kg, 5.000Kg one each (may freewill combination )

Katumpakan: 0.5%

Cleaning accessories: clear material pole

Calibration accessories: water level bubble

Measuring method: MFR MVR/ DENSITY

Supply Power: 220V±10% 50Hz Heat up power: about 550W

Outline size: (length*width*height ) 600*400*500 (unit: mm)

Net weight: 85Kg Gross weight: 135Kg