מכונת השחזה וליטוש מדגם אוטומטית YMPZ-1

  • תיאור: __________
  • חקירה

מבוא:

In the process of preparation of metallographic sample, pre grinding, polishing and grinding are the indispensable procedures. This machine YMPZ-1 is produced with PPC sewage collection plate and cover. This machine is controlled by single chip microcomputer. The motor is DC brushless motor and don’t need to replace the brush, used for a long time. The machine is non-toxic painted. Strong large support chassis design ensures the precision rotary balance. Spindle leak-proof design ensures the bearing almost without damage and the super mute design brings a good experience. It supports for fast disk system, with the use of elasticity, and can be used with automatic grinding device. It can replace the manual grinding and polishing of the procedure, timing and set the speed of grinding head. The platen speed of polishing disc operates independently. It is the best equipment of metallographic sample preparation.

פרמטרים עיקריים:

Grinding Method: Automatic Grinding Wheel Diameter: 230 מ"מ

Speed: 100-1400 r/min, Stepless Power: 400W Test Block: 4

Air Pressure: 2.3~8kg/cm²

Grinding Head Speed: 20-120 r/min, Stepless Way of Pressure: separate pressurized

גודל מדגם: מקס. Φ45mm (Selectable, φ22, φ30, φ45 etc.)

Interface: membrane switch, digital display, set the grinding speed, timing, steering and tank cleaning function

הציג: 1. Speed 2. Time countdown 3. Air pressure

Pressurizing Force Adjustable Range: 0-6 ק ג

Grinding Time: adjustable range 0-100 דקות (It can display the remaining time when grinding)

Rotation Angle of Grinding Head: adjustable

Grinding Direction: forward or reverse direction

Specimen Chuck: specimen fixture can be quickly replaced (quickly-disassembled function)

ממד: 420L×623W×645Hmm

ספק כוח: AC220V, 1000W Weight: 50ק ג

איש קשר אותנו