용융 흐름 인덱서

소개:

To determine the melt mass-flow MFR (g/10min), the melt volume-flow rate MFV(센티미터³/10분)and the melt density of thermo resin, for the engineering plastics of polycarbonate, nylon and fluorine plastics, 등, whose melt temperature are higher, but also fit for the plastics tests of polyethylene, polystyrene, 폴리프로필렌, ABS resin and poly-formaldehyde resin, 등, whose melt temperature are lower, it is widely applied to the fields of plastics materials, 제품, petrochemical

표준:

기가바이트 3682, ISO 1133, 증권 시세 표시기 1238, 소음 53735, UNI-5640, JJB878, and made according to JB/T5465 (Technical Standard of Melting Flow Rate Instrument).

Tests performed:

adopts PID temperature control, 디지털 디스플레이, it can cut material automatically, has two measuring method, MFR and MVR, print out the test report

Main technical parameter:

측정 범위: 0. 01-600.00 g/10min (MFR)

0. 01-600.00 cm/10min(MVR)

0.001-9.999 g/cm (melt density)

Temperature range: 50-400°씨

Temperature precision: ±0.5°C resolution: 0.1°씨

Material canister inside diameter 9.55±0.025mm length: 160밀리미터

Piston diameter 9.457±0.01mm mass: 106g

Mould inside diameter 2.095mm length: 8±0.025mm

부하: full load

Base weight: 0.325킬로그램.

Weights: 0.875킬로그램, 1.290킬로그램, 1.835킬로그램, 3.475킬로그램, 4.675킬로그램, 5.000킬로그램, 5.000Kg one each (may freewill combination )

정밀: 0.5%

Cleaning accessories: clear material pole

Calibration accessories: water level bubble

Measuring method: MFR MVR/ DENSITY

Supply Power: 220V±10% 50Hz Heat up power: about 550W

Outline size: (length*width*height ) 600*400*500 (unit: 밀리미터)

순중량: 85Kg Gross weight: 135킬로그램