- Beskrivelse: __________
- Forespørsel
Introduksjon:
To determine the melt mass-flow MFR (g/10min), the melt volume-flow rate MFV(cm3/10min)and the melt density of thermo resin, for the engineering plastics of polycarbonate, nylon and fluorine plastics, etc, whose melt temperature are higher, but also fit for the plastics tests of polyethylene, polystyrene, polypropylene, ABS resin and poly-formaldehyde resin, etc, whose melt temperature are lower, it is widely applied to the fields of plastics materials, produkt, petrochemical
Standarder:
GB 3682, Iso 1133, ASTM D 1238, LARM 53735, UNI-5640, JJB878, and made according to JB/T5465 (Technical Standard of Melting Flow Rate Instrument).
Tests performed:
adopts PID temperature control, digital skjerm, it can cut material automatically, has two measuring method, MFR and MVR, print out the test report
Main technical parameter:
Måleområde: 0. 01-600.00 g/10min (MFR)
0. 01-600.00 cm/10min(MVR)
0.001-9.999 g/cm (melt density)
Temperaturområde: 50-400°C
Temperature precision: ±0.5°C resolution: 0.1°C
Material canister inside diameter 9.55±0.025mm length: 160Mm
Piston diameter 9.457±0.01mm mass: 106g
Mould inside diameter 2.095mm length: 8±0.025mm
Belastning: full load
Base weight: 0.325Kg.
Weights: 0.875Kg, 1.290Kg, 1.835Kg, 3.475Kg, 4.675Kg, 5.000Kg, 5.000Kg one each (may freewill combination )
Nøyaktighet: 0.5%
Cleaning accessories: clear material pole
Calibration accessories: water level bubble
Measuring method: MFR MVR/ DENSITY
Supply Power: 220V±10% 50Hz Heat up power: about 550W
Outline size: (length*width*height ) 600*400*500 (unit: Mm)
Nettovekt: 85Kg Gross weight: 135Kg