- Description
- Inquiry
1. Introduction
This computer controlled one column table-top type electromechanical UTM is used to do tensile test of non-metal materials with small tensile strength. The testing materials like plastic film, rubber, adhesive, paper, foam, composite material, etc. By means of relative testing accessories, it also can do compression, bending, peeling and tearing, etc test. It meet with the requirements of GB, ISO, JIS, DIN and ASTM, etc. It is essential testing instrument for quality testing section, university and colleges, research institution and industrial and mining enterprise.
2. Main Technical Parameters:
Model
Specification |
WDW-0.5 |
WDW-1 |
WDW-2 |
WDW-5 |
Force Range (kN) |
0.01-0.5 |
0.02~1 |
0.04~2 |
0.10~5 |
Force Accuracy |
±1% of applied force |
|||
Position Resolution (mm) |
0.01 |
|||
Test Speed Range |
0.005mm/min~500mm/min, servo control |
|||
Crosshead Travel (mm) |
800 (can be extended) |
|||
Power Requirement |
1 phase, 220V±10%, 50Hz |
|||
Environmental Requirements |
Room temperature~40℃, relative humidity<80% |
|||
Frame Dimension (mm) |
600×420×1700 |
|||
Frame Weight (kg) |
300 |