- การบรรยาย
- การไต่ถาม
แนะ นำ:
In the process of preparation of metallographic sample, pre grinding, polishing and grinding are the indispensable procedures. This machine YMPZ-1 is produced with PPC sewage collection plate and cover. This machine is controlled by single chip microcomputer. The motor is DC brushless motor and don’t need to replace the brush, used for a long time. The machine is non-toxic painted. Strong large support chassis design ensures the precision rotary balance. Spindle leak-proof design ensures the bearing almost without damage and the super mute design brings a good experience. It supports for fast disk system, with the use of elasticity, and can be used with automatic grinding device. It can replace the manual grinding and polishing of the procedure, timing and set the speed of grinding head. The platen speed of polishing disc operates independently. It is the best equipment of metallographic sample preparation.
พารามิเตอร์หลัก:
Grinding Method: Automatic Grinding Wheel Diameter: 230 มิลลิเมตร
Speed: 100-1400 รอบ / นาที, Stepless Power: 400W Test Block: 4
Air Pressure: 2.3~8kg/cm²
Grinding Head Speed: 20-120 รอบ / นาที, Stepless Way of Pressure: separate pressurized
ขนาดตัวอย่าง: สูง สุด. Φ45mm (Selectable, φ22, φ30, φ45 etc.)
Interface: membrane switch, จอแสดงผลดิจิตอล, set the grinding speed, timing, steering and tank cleaning function
แสดง: 1. Speed 2. Time countdown 3. Air pressure
Pressurizing Force Adjustable Range: 0-6 กิโลกรัม
Grinding Time: adjustable range 0-100 minutes (It can display the remaining time when grinding)
Rotation Angle of Grinding Head: ยืดหยุ่น
Grinding Direction: forward or reverse direction
Specimen Chuck: specimen fixture can be quickly replaced (quickly-disassembled function)
มิติ: 420L×623W×645Hmm
ไฟ: 220 โวลต์ AC, 1000W Weight: 50กิโลกรัม
สินค้าที่เกี่ยวข้อง
-
อ่านเพิ่มเติมมุมมองด่วน
ตัวอย่างเครื่องบดและขัดเงาความเร็วสองเท่า YMP-2B
อ่านเพิ่มเติมมุมมองด่วน -
อ่านเพิ่มเติมมุมมองด่วน
เครื่องบดและขัดตัวอย่างอัตโนมัติ YMPZ-2
อ่านเพิ่มเติมมุมมองด่วน -
อ่านเพิ่มเติมมุมมองด่วน
เครื่องกดติดตั้งตัวอย่างโลหะ (น้ําหล่อเย็น)
อ่านเพิ่มเติมมุมมองด่วน -
อ่านเพิ่มเติมมุมมองด่วน
เครื่องบดตัวอย่างโลหะ Pre-grinder YM-1
อ่านเพิ่มเติมมุมมองด่วน -
อ่านเพิ่มเติมมุมมองด่วน
เครื่องกดติดตั้งตัวอย่างโลหะ
อ่านเพิ่มเติมมุมมองด่วน -
อ่านเพิ่มเติมมุมมองด่วน
เครื่องบดตัวอย่างโลหะ MPJ-35
อ่านเพิ่มเติมมุมมองด่วน -
อ่านเพิ่มเติมมุมมองด่วน
ตัวอย่างเครื่องบดและขัดเงา (ไม่มีขั้นตอน) วายเอ็มพี-1
อ่านเพิ่มเติมมุมมองด่วน -
อ่านเพิ่มเติมมุมมองด่วน
เครื่องกดติดตั้งตัวอย่างโลหะอัตโนมัติ
อ่านเพิ่มเติมมุมมองด่วน -
อ่านเพิ่มเติมมุมมองด่วน
เครื่องบดตัวอย่างโลหะ MPJ-25
อ่านเพิ่มเติมมุมมองด่วน -
อ่านเพิ่มเติมมุมมองด่วน
เครื่องตัดตัวอย่างโลหะอัตโนมัติ
อ่านเพิ่มเติมมุมมองด่วน